Name: MKS GEN-L V1.0
This controller board is integrated which is based on Marlin open source,
greatly compatible with Ramps1.4. Further, it is good cost effective with high performance.
1* MKS Gen-L V1.0
1* MKS Gen-L V1.0
- Assembly with high quality MOSFET which is good at cooling and ensure stable working in a long time.
- Use dedicated power chip which has excellent cooling and stable electricity.
- Adopt stable and reliable filter circuit to reduce interference. Improve printing performance.
- Highly, improve the MOSFET cooling of heated bed .
- It is easy and safe to assemble motors, drivers and endstops in different color.
- Attention:Please disconnect all parts from the board when upload firmware.
More features as following
The direction of stepper drivers on boards.
How to Adjust Driver Current. Caution! Please mind the power polarity and drivers direction. Please don’t put the drivers or motors on/off while power on. Please disconnect all motors when adjust driver current. A4988(1amp) I= vref /1.6,default Vref 1.6V and 0.5A,Max1.0A. A4988(2amp) I= vref /0.8,default Vref 0.8V and 1.0A,Max2.0A. DRV8825 I= vref *2, default 0.65A and 1.3A,Max 2.5A. LV8729 I= vref /0.5, default 0.4A and 0.8A,Max 1.5A. Following picture shows how to check the Vref.
Name: MKS TFT35 Touch Screen
1. 7 type languages online switching.
2. Preview G-code model, display model on printing.
3. Inbuilt 32 bit high speed ARM chip.
4. 3.5 inch touch screen, simple operating interface, high sensitivity.
5. Support WIFI remote control, you may monitor via APP or PC.
Available for Android and IOS system.
6. Easy to update firmware by SD card.
7. Easy to replace into your logo and customize 13 commands .
8. Support printing from breakpoint,power cut detecting,printing save,
outage detecting and auto off function.
9. Supports Marlin, Smoothiewar,etc.
Attention: MKS TFT35 is unable to work with Ramps1.4.